Featured Projects | Nexus Grid

Pulled Cat6 along structural steel joists and fabricated rigid suspended EMT conduit drops extending down from the ceiling to lower warehouse cameras to optimal focal heights, eliminating vibration and protecting wiring.

Ran concealed plenum Cat6 cable, terminating into flush-mounted indoor dome cameras positioned at hallway intersections and key common areas.
Core-drilled and sealed an exterior penetrations run to deploy an outdoor weatherproof bullet/turret camera on a commercial junction box, angled specifically for full rooftop and perimeter visibility..
Terminated all 10 field runs with commercial RJ45 modular jacks onto patch panels, connected into a dedicated PoE+ network switch, and fine-tuned all viewing angles.

We cut and routed 4 commercial hollow-metal frames to house heavy-duty commercial electric strikes flush with the jambs.

Fished shielded multi-conductor composite access control cabling through door frames and wall cavities to keep all wiring completely concealed.
Mounted and secured commercial electric strikes, calibrating latch depths for smooth mechanical release and positive relatching under preload.
Integrated door position sensors and request-to-exit devices to support door-prop and forced-entry monitoring.

Surface- and mullion-mounted 4 commercial HID credential readers at ADA-compliant heights adjacent to each entry door.

Have a Similar Project Coming Up?

Send us your drawings or schedule an on-site walkthrough. We provide pricing within 48 hours.

Routed all reader, strike power, DPS, and REX cabling into the central wall-mounted access control power cabinet and controller backplane.
Combed and terminated field wiring into fused relay distribution modules and terminal blocks using clean hook-and-loop management.
Completed full functional testing across all 4 doors (badge read authorization, schedule unlock/lock, strike release) and confirmed active 24/7 NVR recording streams for all 10 cameras.

Job completed